Single-Door Cabinet
A clean front for compact square formats, with handing, opening clearance and shelf positions confirmed on the drawing.
24×24 DIRECTIONLEFT / RIGHT HANDADJUSTABLE SHELVES
Custom square medicine cabinets
Custom Square Medicine Cabinets for Bathroom Projects
Coordinate true-square proportions with recessed or surface mounting, mirrored doors, adjustable storage and project-specific lighting or electrical options.
24×24 & 30×30 formatsInstallation reviewDrawing-led customization
True-square proportions
Balanced Geometry With Storage Behind the Mirror
Equal width and height create a compact, balanced front above single vanities and in powder rooms. Behind the mirrored face, the cabinet depth, door movement and shelf layout are coordinated around the wall and daily storage needs.
Choose a clean frameless direction, an aluminum edge, non-lighted simplicity or an integrated-lighting version. Each configuration is reviewed against the requested size, installation and destination market.
Equal SidesTrue square visible geometry
Flush OptionRecessed wall integration
Surface OptionFinished visible side panels
Custom InteriorDoor and shelf coordination
Final dimensions, construction and functions are confirmed by drawing, sample and order review.
Square cabinet sizes
Start With the Wall and Vanity Proportion
24×24 and 30×30 are common search and comparison formats. The right size still depends on vanity width, wall opening, cabinet depth, door clearance and storage plan.
SEND YOUR DIMENSIONSCOMPACT DIRECTION24 × 24 inReview single-door layout, shelf spacing and wall-opening requirements.
BALANCED DIRECTION30 × 30 inReview single- or double-door construction and installation clearance.
LARGER DIRECTION36 × 36 inReview door segmentation, weight, support and electrical routing.
DRAWING-DEFINEDCustom SizeSend overall dimensions, depth and wall condition for technical review.
Configuration platforms
Start With the Cabinet Construction
These are development directions, not fixed stock models. Dimensions, hinge layout, internal components, electrical parts and compliance requirements remain drawing- and market-dependent.
Double-Door Cabinet
Divide wider square fronts for easier access while coordinating hinge positions, mirrored interiors and storage zones.
30×30 DIRECTIONBI-VIEWINTERIOR REVIEW
Lighted Square Cabinet
Add lighting only after confirming the mirror layout, control method, voltage, cable entry and destination requirements.
LED OPTIONCONTROL REVIEWMARKET VOLTAGE
Installation comparison
Recessed or Surface Mount?
Recessed
Creates a flush appearance. Confirm rough opening, wall cavity depth, framing, cable entry and trim condition before production.
EXPLORE RECESSED CABINETS →Surface Mount
A practical route when the wall cavity cannot be changed. Confirm visible side finish, projection, fixing points and cable concealment.
EXPLORE SURFACE-MOUNT CABINETS →Still Deciding?
Send the wall type, available depth and a site photo. Both directions can be compared during technical review.
REQUEST AN INSTALLATION REVIEW →
Interactive project brief
Configure a Starting Direction
Select the closest options. Final construction and availability are confirmed after drawing and order review.
Starting brief:
Recessed · Single door · Non-lighted · Adjustable shelves · None · 24 × 24 in
USE THIS BRIEFRecessed · Single door · Non-lighted · Adjustable shelves · None · 24 × 24 in
Quotation inputs
Resolve the Wall Before Resolving the Cabinet
A useful quotation connects the visible square front to the hidden installation, cabinet body, door movement and service access.
Best first message
Overall size, wall opening or wall type, quantity, destination, door/lighting direction and drawing or reference image.
Overall size, wall opening or wall type, quantity, destination, door/lighting direction and drawing or reference image.
Overall GeometryConfirm equal width and height, visible mirror area, overall depth, corner/edge treatment and allowable tolerances.
Installation ConditionRecessed, surface or semi-recessed; stud/cavity condition, wall opening, trim, projection and fixing method.
Cabinet BodyMaterial direction, finish, moisture exposure, internal depth, ventilation or service access where required.
Door & HingesSingle/double/multi-door layout, handing, opening angle, soft-close direction and clearances near walls or lighting.
Interior StorageShelf count, adjustability, glass or other material direction, interior mirror and accessory positions.
Lighting & DefoggingLight position, color-temperature direction, dimming/control, demister coverage and switching logic.
Electrical & MarketVoltage, hardwire/plug route, outlet/USB request, cable entry and required market-specific review.
Packaging & DeliveryDoor restraint, corner/edge protection, carton or crate route, labels, destination and shipment sequence.
Project workflow
From Wall Condition to Repeat Order
Each selection should be converted into a reviewable drawing and approved reference before batch production.
01
Requirement Review
Size, quantity, market, wall and feature direction.
02
Technical Alignment
Opening, cabinet depth, doors, shelves and electrical scope.
03
Sample Confirmation
Approve appearance, fit, function and packaging reference.
04
Controlled Production
Use the approved specification as the batch standard.
05
Inspection & Packing
Check agreed points and prepare for shipment.
Square medicine cabinet FAQs
Questions Before Quotation
What makes a medicine cabinet truly square?
The overall visible width and height are equal. The wall opening, cabinet body and door divisions may use different internal dimensions and must be shown on the drawing.
Can the same cabinet be recessed or surface mounted?
Some constructions can support both directions, but side panels, trim, fixing and cable entry can change. Confirm the intended installation rather than assuming one cabinet fits every wall condition.
Can lighting, a demister, outlet or USB be added?
These can be reviewed as project options. Voltage, component location, switching, wiring and destination-market requirements must be confirmed for the selected model.
What information is needed for a project quote?
Send overall size, installation condition or wall opening, door layout, features, quantity, destination and a drawing or reference image.
What are the MOQ and lead time?
They depend on construction, size, finish, electrical scope, packaging and order plan. OJMIRROR confirms them after reviewing the actual requirement.
Square medicine cabinet comparison
Compare 24 × 24, 30 × 30 and 36 × 36 Directions
Use the visible size as a starting point. Cabinet depth, rough opening, shelf positions and electrical routing remain drawing-dependent.
| Review item | 24 × 24 in | 30 × 30 in | 36 × 36 in | Custom square |
|---|---|---|---|---|
| Door planning | Single-door review | Single- or double-door review | Door-segmentation review | Drawing-defined |
| Mounting direction | Recessed or surface review | Recessed or surface review | Recessed or surface review | Wall-condition review |
| Cabinet depth | Confirm by drawing | Confirm by drawing | Confirm by drawing | Project-defined |
| Rough opening | Confirm by drawing | Confirm by drawing | Confirm by drawing | Project-defined |
| Shelves & interior | Layout review | Layout review | Layout review | Project-defined |
| Lighting & electrical | Optional review | Optional review | Optional review | Market-defined review |
Specification boundary: these are comparison directions, not stock-model specifications. Final dimensions, hardware, electrical parts, compliance scope, MOQ and lead time require drawing and order review.
Start with what you know
Send Your Square Cabinet Brief
A wall opening, overall size, quantity or reference image is enough to begin a technical review.
Drawing reviewInstallation alignmentQuotation preparation
