Choose the Display
Clock only, or clock plus temperature; confirm time format, color, brightness and setting method.
Digital Clock · OEM / ODM · Project Supply
Custom LED Bathroom Mirrors with Clock
Choose the mirror platform first, then configure compatible touch-control and clock modules for distributors, private labels, hotels and residential projects—with display position, time format, lighting and electrical details reviewed before quotation.
Drawing-led display layoutModel-specific clock modulesExport packaging support
Time at a glance
A Useful Display, Integrated into the Mirror
A bathroom mirror with clock places a compact digital time display inside the reflective area, keeping it visible without adding a separate device to the vanity.
For a repeatable product, the display module must be coordinated with the mirror size, horizontal or vertical mounting, lighting pattern, touch controls and rear-component layout.
Display color, brightness, time format, temperature reading and power-loss behavior depend on the selected module. Confirm each item on the approved drawing and sample.
See the configuration checklist →
From feature idea to approved SKU
Three Decisions Define the Clock System
Turn “mirror with clock” into a configuration that can be sampled, tested and repeated.
Lock the Position
Coordinate display placement with mirror geometry, orientation, lighting and touch-control zones.
Define Power Behavior
Review wiring, standby power, memory or backup behavior and destination-market requirements.
Choose the right information level
Clock Only, Clock + Temperature or Connected Display?
Separate a practical time display from broader “smart mirror” claims so buyers can specify only the functions they need.
Digital Clock
Shows time in a compact mirror-integrated module. Confirm 12/24-hour format, position and setting access.
Clock + Temperature
Adds an ambient-temperature reading. Display logic and sensor location should be checked on the sample.
Connected Smart Display
Weather, apps, voice or network content require a different hardware and software scope and should not be assumed.
Documented accessory modules
Touch Control and Clock Modules
These are configuration components from the supplier catalogue, not standalone mirror SKUs. Final compatibility, cut-out, wiring and position require model-level confirmation.
K112R SERIES
Radar-Sensing Touch Controller
Mirror-mounted controller for touch and motion-sensing operation. The catalogue lists 12–24V working voltage, up to 5A switching current, approximately 20-second delay, 24GHz sensing and customizable wiring, terminal, backlight, delay-off and memory options.
Accessory module · catalogue referenceK3300W SERIES
Wi‑Fi Weather Clock Module
Mirror display module with 12–24V supply, 80mA working current, 2.4GHz Wi‑Fi, Chinese/English web interface, selectable 12/24-hour format, °C/°F temperature units and three-day weather display. Catalogue size: 86 × 86 × 12mm.
Accessory module · clock / temperature / weatherProduct directions
Clock Mirror Platforms
Start with the mirror format, then coordinate the display module and related functions around the channel and installation.
Rectangular Mirrors
Landscape or portrait formats with display location reviewed for the final mounting direction.
VIEW RECTANGULAR MIRRORS →
Round Mirrors
Custom diameter and display position coordinated with the circular lighting pattern.
VIEW ROUND MIRRORS →
Framed Mirrors
Frame finish, rear structure, clock module and control layout developed as one assembly.
VIEW FRAMED MIRRORS →
Hospitality Programs
Room-schedule supply with an approved display baseline, repeatable settings and project packing.
VIEW HOSPITALITY SOLUTIONS →Quotation-ready specification
Decisions Buyers Should Confirm
A useful RFQ goes beyond “with clock.” These inputs affect module selection, component layout, test criteria and price.
Build Your RFQDisplay TypeClock only or clock plus temperature
Format & Color12/24-hour format, display color and brightness
PositionLeft, center or right; drawing-defined height
Power BehaviorSetting method, standby and power-loss memory
Mirror SystemSize, orientation, lighting, controls and anti-fog
Commercial ScopeQuantity, branding, documentation and packaging
Technical coordination
Clock Mirror Specification Framework
Use this framework without assuming that one display module or electrical specification applies to every model.
| Display content | Confirm clock only or clock plus temperature, along with 12/24-hour format and display color. |
|---|---|
| Position & orientation | Clock position is approved on the drawing for the selected mirror size and horizontal or vertical mounting. |
| Accessory selection | K112R touch / radar controller and K3300W Wi‑Fi weather clock module are catalogue references. Confirm the selected module against the mirror series before quotation. |
| Cut-out & wiring | Rear opening, display window, cable route, connector and power supply must be checked against the mirror drawing. |
| Setting access | Button, touch sequence, web interface or other setting method depends on the selected module and rear structure. |
| Power-loss behavior | Required time retention, memory or backup behavior must be specified and verified on the approved sample. |
| Function integration | Frontlit or backlit lighting, dimming, CCT, anti-fog, Bluetooth and touch controls require compatibility review. |
| Compliance files | Accessory documentation does not automatically prove whole-mirror compliance. Required certifications, labels, manuals and test records must be checked for the complete model. |
| Commercial terms | Sample scope, MOQ, lead time, branding, packaging and delivery plan are quoted after configuration review. |
Built for B2B programs
Choose the Supply Scenario
The clock system should support the selling channel and installation environment, not sit as an isolated feature.
Build a coherent range
Coordinate shapes, sizes, display tiers, lighting and control options across a wholesale assortment.
PLAN A PRODUCT RANGE →Define a repeatable SKU
Lock the module, display behavior, branding, manuals, labels and packaging before scale-up.
DISCUSS OEM / ODM →Match drawings and rooms
Coordinate mirror schedules, electrical points, mounting direction, phased delivery and site requirements.
SEND PROJECT DETAILS →Manufacturing and quality
Verify the Configuration That Will Ship
Approval should follow the selected clock module, component layout and agreed acceptance criteria.
Buyer questions
Bathroom Mirror with Clock FAQ
Can the mirror show both time and room temperature?
Clock-only and clock-plus-temperature configurations can be reviewed according to the selected module and mirror design.
Can buyers choose 12-hour or 24-hour time format?
Available formats depend on the display module and destination requirements. Confirm the format before sampling.
Where can the clock display be positioned?
Position is coordinated with size, mounting orientation, lighting, touch controls and rear components, then confirmed by drawing.
Will the clock retain its setting after power loss?
Backup and memory behavior vary by module and wiring design. Required behavior should be written into the approved specification and test criteria.
Can a clock be combined with anti-fog and dimmable lighting?
These functions can often be integrated when the selected electrical layout supports them. Compatibility must be reviewed for the specific model.
What should I send for a quotation?
Send dimensions or a drawing, quantity, destination country, preferred display, lighting and control requirements, certification needs and delivery target.
Project inquiry
Define Your Clock Mirror Program
Share what you already know. Unknown details can be reviewed during technical coordination.
