Single Door
One access zone with left- or right-hinge review for narrower wall and vanity conditions.
EXPLORE SINGLE-DOOR →
Material-led cabinet programs
Aluminum Medicine Cabinets
Develop mirrored cabinet ranges around aluminum body construction, mounting conditions, door layouts, storage and electrical requirements—then lock the result through drawing and sample approval.
Recessed or surface reviewSingle to multi-door directionOEM / ODM development
01 · BodyAluminum constructionAlloy, profile and finish confirmed per model
02 · MountingRecessed or surfaceWall opening and side treatment reviewed
03 · DoorSingle to multi-doorHinges, seams and clearances coordinated
04 · FunctionNon-lighted or electricalOptions depend on approved platform
Collection directions
Start With the Cabinet Layout
Choose the closest structure first. Dimensions, mounting and functions can then be reviewed without treating every combination as a ready-made model.
Double Door
Equal or offset door divisions for wider storage and manageable opening clearances.
EXPLORE DOUBLE-DOOR →Triple Door
Three access zones with additional mirror-seam, hinge and shelf coordination.
EXPLORE TRIPLE-DOOR →Lighted Cabinet
Review front or interior light, anti-fog, controls and outlet direction by target market.
EXPLORE LIGHTED →
Decision pointSingle doorDouble doorTriple doorLighted
Best starting questionHinge side?Equal or offset split?Seam and access plan?Electrical route?
Mounting reviewRequiredRequiredRequiredRequired
Critical clearanceAdjacent wallDoor overlapMultiple swingsService access
Interior directionCompact storageTwo access zonesWide-zone planningWiring + storage
This matrix guides the first discussion. It does not imply that every feature and mounting route is available on every cabinet platform.
Configuration at a glance
Define the Cabinet Before Requesting a Quote
Use these eight specification points to match an aluminum cabinet platform to the wall, storage plan and destination market. Final dimensions are confirmed on the selected drawing.
Overall sizeWidth × height × projectionSend the target size or vanity elevation.
Cabinet bodyAluminum profile constructionConfirm profile, joints, body depth and finish.
Door layoutSingle, double or tripleInclude hinge side, split and opening clearance.
MountingRecessed or surface mountProvide wall opening and finished-wall condition.
Exterior sidesMirrored side-panel reviewRecommended for visible sides on surface mounting.
InteriorAdjustable glass shelvesReview shelf count, positions and interior mirror.
ElectricalLight, anti-fog or outletConfirm voltage, plug, controls and market.
ApprovalDrawing and sampleLock finish, function, packaging and QC criteria.
Swipe horizontally to compare all cabinet directions →
Material engineering
Specify the Aluminum Body, Not Just the Finish Color
Aluminum medicine cabinets are commonly chosen for a relatively light cabinet structure and finish directions suitable for bathroom environments. But the word “aluminum” alone does not define the profile, alloy, wall thickness, finish or load path.
01
Profile and joint directionReview frame sections, corner joints, back-panel interface and visible edges.
02
Surface treatmentConfirm anodized, coated or other finish direction against the approved sample.
03
Hinge and shelf supportCoordinate door load, shelf pins and internal access with the selected profile.
04
Bathroom-use reviewDefine cleaning, moisture exposure and acceptance criteria for the target project.
Approval point: confirm the profile, alloy, surface finish and cabinet construction on the selected model drawing and approved sample.
Material selection
Compare the Cabinet Body Direction
Material choice affects structure, finish control, exposed edges and bathroom-use review. It should be evaluated with the actual construction—not by material name alone.
Review pointAluminum directionSteel directionWood-based direction
Typical construction routeExtruded profiles and assembled sectionsFormed sheet or welded constructionPanel construction with joined edges
Bathroom-use focusAlloy, joints and surface treatmentCoating, exposed edges and corrosion controlPanel grade, sealing and edge protection
Visible finish reviewAnodized or coated directionCoated or stainless-look directionDecorative surface or wood-look direction
Approval evidenceProfile, finish sample and construction drawingMaterial, coating and construction drawingPanel specification, edge detail and sample
Swipe horizontally to compare material directions →
Installation intent
Match the Cabinet to the Wall Condition
Recessed and surface mounting change the opening, projection, visible sides and fixing route. The selected cabinet platform must be reviewed against the actual wall.
Inside the wallRecessed review
On the finished wallSurface-mount review
Recessed
A reduced projection depends on a compatible wall cavity and coordinated rough opening.
- Rough opening W × H × D
- Framing and obstruction review
- Trim and front-overlap detail
Surface Mount
For surface mounting, mirrored exterior side panels can cover the visible aluminum cabinet sides and coordinate the finished appearance.
- Overall cabinet projection
- Mirrored side-panel or side-kit direction
- Mounting hardware and wall condition
Dual-Mount Review
A cabinet supports both routes only when its body, visible sides and hardware are designed accordingly.
- Do not assume universal compatibility
- Confirm included and optional parts
- Approve installation details
Installation image is a concept comparison, not a construction drawing. Final framing, fixing and clearances require an approved installation document.
Size and opening guide
One Cabinet Needs More Than One Size
Overall dimensions help match the cabinet to the vanity. Recessed installation also requires the body and wall opening to be checked separately.
Build a Starting Brief
What the room and elevation seeOverall mirror/cabinet width, height and projection relative to the vanity, faucet, sconces and side walls.
What occupies the wall or projects from itBody width, height and depth, excluding or distinguishing front mirror overlap and decorative side treatment.
What the wall must provideRequired W × H × D, framing tolerance and checks for pipes, wiring, vents or structural obstructions.
What the doors and shelves needDoor swing, hinge side, mirror seam, adjacent-wall clearance, shelf removal and service access.
Use the Actual Approved Drawing
Published size directions help start a discussion. Installation dimensions should be taken from the approved model drawing or the actual product, not inferred from a category image.
Recessed planning
Measure the Wall Before Finalizing the Cabinet
A recessed cabinet decision starts with the wall—not only the mirror width. Record the room condition first, then compare it with the approved cabinet drawing.
Set the Location
Record vanity centerline, desired cabinet position, faucet, lighting and nearby wall clearances.
Check the Wall
Identify stud direction and possible plumbing, wiring, vents or structural obstructions.
Record W × H × D
Separate the available wall cavity from the cabinet body and overall front dimensions.
Verify the Drawing
Confirm rough opening, tolerance, fixing points, overlap and door swing against the approved model.
Installation note: do not cut or modify the wall from a category image or an unapproved size table. Use the selected model's approved installation drawing and qualified local installation guidance.
Interactive project brief
Build a Starting Direction
Select a direction for discussion. Engineering feasibility, price, MOQ and final specification remain subject to review.
1. Mounting
2. Door layout
3. Lighting
4. Interior
Starting directionRecessed review · Single door · Non-lighted · Adjustable shelves
Use This Brief
Purchase scenarios
Three Routes From Selection to Approval
The same cabinet direction requires different supporting information for a product range, private-label model or building project.
Build a Clear Range
Organize widths, mounting routes and feature tiers without creating overlapping or unsupported models.
PLAN A WHOLESALE RANGE →Lock a Repeatable Model
Coordinate construction, finish, branding, instructions, labels, packaging and sample approval.
DISCUSS OEM / ODM →Review the Room Schedule
Align vanity widths, wall openings, electrical requirements, quantities and phased delivery needs.
SEND A PROJECT SCHEDULE →
Production baseline
Four Checkpoints Before a Repeat Order
Convert the chosen direction into a reviewable specification and repeatable acceptance route.
Drawing
Confirm cabinet, opening, doors, shelves, hinges, fixing and electrical zones.
Sample
Review finish, mirror edges, alignment, closing, lighting and interior access.
QC Criteria
Agree measurable dimensions, visual points and functional checks.
Packaging
Review mirror protection, corners, carton marks and project identification.
Confirm before order: selected alloy, finish, electrical functions, applicable documentation, MOQ and lead time are recorded with the approved model and destination market.
Technical review materials
Request the Information Needed for Your Decision
Available documents depend on the selected cabinet platform and project stage. Request the relevant review material instead of assuming that one generic file applies to every configuration.
Option Review
Confirm door layout, mounting direction, interior, finish and electrical discussion points.
Drawing Review
Identify the overall size, cabinet body, rough opening, fixing zones and operating clearance needed.
Installation Review
Discuss recessed or surface mounting, wall condition, side treatment and applicable installation information.
Sample & QC Route
Define finish sample, function checks, visual criteria, packaging and repeat-order approval points.
A request starts a model-specific review; it is not a claim that every document, feature or certification is already available for every cabinet.
Specification questions
Aluminum Cabinet FAQ
Use these answers to define the next technical input without turning an option into an unsupported promise.
Why is aluminum used for bathroom medicine cabinets?
Aluminum constructions are commonly selected for their relatively low weight, corrosion-resistant finish directions and compatibility with extruded profiles. The exact alloy, finish, structure and performance must be confirmed for each model.
Can aluminum medicine cabinets be recessed or surface mounted?
Both mounting directions can be reviewed. The selected platform, wall opening, fixing route, exposed side treatment and approved drawing determine feasibility.
Are anodized and painted finishes available?
Finish directions can be discussed against a physical sample or approved standard. Availability, color tolerance and surface performance depend on the profile and production route.
Can lighting, anti-fog and outlets be added?
These options can be reviewed after the base cabinet is selected. Compatibility and documentation depend on the model, destination market and electrical specification.
Do surface-mounted aluminum medicine cabinets have mirrored sides?
Mirrored exterior side panels or a model-specific side kit can be reviewed when the cabinet body remains visible after surface mounting. Confirm the included side treatment with the selected cabinet configuration.
What cabinet depth and rough opening should we use?
Cabinet depth and recessed rough opening vary by platform. Send the available wall depth and target overall size so the body dimensions, overlap and required opening can be checked on the approved drawing.
Are left- and right-hinged doors available?
Hinge direction can be reviewed for single-door configurations. Adjacent walls, faucets, lighting and service clearance should be checked before the door direction is confirmed.
What should we send for a quotation?
Send overall dimensions, recessed opening if applicable, mounting route, door layout, interior requirements, electrical functions, quantity, destination and target timing.
Project inquiry
Send Your Aluminum Cabinet Brief
A drawing, wall opening, reference image or overall size is enough to begin a product review.
Overall size or openingMounting routeDoor layoutInterior requirementsElectrical needsQuantity and market
