Concealed Charging
Plan space for toothbrushes, shavers or other agreed low-profile devices without turning shelves into cable obstacles.
Power inside. Countertop clear.
Medicine Cabinets
Medicine Cabinets
with Outlets
Develop mirrored storage with interior outlets and charging options—coordinated around cabinet space, wiring, installation and destination-market requirements.
Outlet / USB reviewRecessed or surface mountDrawing-led quotation
INTERIOR OUTLET OPTIONSUSB-A / USB-C REVIEWLIGHTED & NON-LIGHTED PLATFORMSDESTINATION-MARKET CONFIRMATION
Category fit
More Than Adding a Socket
A medicine cabinet with outlet answers a clear product-selection need: concealed charging and convenient power inside mirrored storage. Whether the brief calls for a medicine cabinet with electrical outlet or a medicine cabinet with power outlet, the module must work with storage, door movement and installation as one system.
Protected Interior Layout
Coordinate outlet position with shelf adjustment, hinge hardware, door clearance and usable bottle height.
Market-Specific Review
Define destination, voltage, plug format, protection, wiring entry and documentation before the sample is approved.
Powered cabinet platforms
Start with the Closest Configuration
These visuals show development directions, not stocked models. Final cabinet dimensions, electrical ratings, components and documentation are confirmed for the selected project.
Interior Power
A focused cabinet direction for concealed toothbrush or shaver charging.
ADD TO INQUIRY →Combined Charging
Review AC receptacle with USB-A and/or USB-C around the intended devices.
ADD TO INQUIRY →Light + Defog + Power
Coordinate outlet, lighting, demister, controls and service access as one system.
ADD TO INQUIRY →Configuration images are design directions. They do not establish standard dimensions, ratings or certification status.
Power configuration
Choose the Function, Then Resolve the Circuit
Options below are project directions, not universal standard specifications. Final component ratings and compliance scope are confirmed against the selected model and market.
Interior Receptacle
A dedicated internal power point for agreed appliances, positioned to protect storage access and cable routing.
Combined Charging
AC power with USB-A and/or USB-C direction, subject to component space, output requirements and documentation.
Light + Defog + Outlet
Coordinate multiple electrical functions, switching logic, driver space, heat management and service access.
Quotation matrix
Inputs That Change the Cabinet
Put these decisions on the drawing or project brief. They affect engineering, quotation, sampling and installation.
| Decision | Project input | Engineering review | Status |
|---|---|---|---|
| Outlet format | AC receptacle, USB-A, USB-C or combination | Component size, rating and mounting panel | CONFIRM BY MARKET |
| Intended use | Charging devices and any higher-load appliance requirement | Load, protection and operating conditions | PROJECT REVIEW |
| Position | Underside of the upper power box | Plug projection, shelves, stored items and cable clearance | DRAWING REQUIRED |
| Installation | Recessed, surface mount or project-defined | Cable entry, wall condition, side finish and service access | INSTALLER REVIEW |
| Electrical market | Destination, voltage and applicable requirements | Components, labels, manuals and documentation scope | VERIFY BEFORE QUOTE |
| Cabinet platform | Size, depth, doors, shelves and other powered features | Usable space, thermal layout and assembly sequence | MODEL DEPENDENT |
Interior power map
Keep Power Reachable Without Losing Storage
The preferred position depends on what will plug in, how shelves move and where wiring can enter the cabinet.
Side panelAccessible beside shelves
Back panelLow-profile layout review
Lower zoneCharging-base direction
Service zoneWiring and access defined
Interactive project brief
Build Your Starting Specification
Select the closest direction. Final feasibility, pricing, MOQ, lead time and compliance route follow engineering review.
1. Power module
2. Interior position
3. Mounting
4. Other functions
Starting brief:
Outlet · Side panel · Recessed · Outlet only
ADD TO PROJECT INQUIRY
Outlet · Side panel · Recessed · Outlet only
Interior clearance
Design Around the Plug, Not Just the Outlet
A power module can fit the cabinet and still interfere with daily storage. Review the connected device, plug body and cable path before locking the shelf and hinge positions.
01
Plug projectionAllow space for the adapter or plug body without reducing usable bottle depth.
02
Shelf adjustmentKeep the selected charging zone clear when glass shelves move between positions.
03
Door & hinge movementCheck cable loops and stored devices against the hinge arm and closing door.
04
Cleaning & serviceKeep components reachable and define the approved maintenance and access route.
Visual shown for layout discussion. Final positions and clearances follow the reviewed cabinet drawing and selected components.
Installation route
Coordinate the Cabinet with the Wall
A powered cabinet needs a resolved mounting and cable-entry plan. The in-cabinet outlet is an additional product feature; it does not replace any bathroom receptacle required by the applicable project code.
Recessed Installation
- Confirm rough opening and usable cavity depth.
- Identify studs, plumbing and existing electrical routes.
- Set wiring entry before the cabinet is fixed.
- Maintain access required by the selected construction.
Surface-Mount Installation
- Confirm the finished side treatment or side kit.
- Resolve cable concealment and rear entry conditions.
- Review projection above the vanity and faucet.
- Coordinate wall support with cabinet weight.
Confirm before quotation
Define the Complete Power Scope
Confirm these six inputs together. A change in market, load or control behavior can affect component selection, cabinet layout and project documentation.
01Destination marketCountry, state/region and project requirements.
02SupplyVoltage, frequency and available circuit information.
03Intended devicesToothbrush, shaver or higher-load appliance requirement.
04Outlet / USBFormat, count, output and preferred location.
05Protection & listingRequired GFCI/RCD route and documentation scope.
06Control logicContinuous power, switched power or project-defined behavior.
Cabinet format
Match the Power Layout to the Door Plan
Door count changes usable storage zones, hinge positions and where an outlet module can sit. Dimensions shown below are planning directions; final availability follows the selected construction.
1 DOOR · 1 POWER ZONE
Compact direction
Single Door
For narrow walls, single vanities and focused interior charging.
DoorLeft / right reviewPower zoneTop-box undersideMountingRecessed / surface review
2 DOORS · SHARED STORAGE
Shared-storage direction
Double Door
For wider storage with separated door access and charging zones.
DoorBi-view splitPower zoneTop-box undersideMountingWall and support review
3 DOORS · DRAWING-DEFINED ZONES
Wide-project direction
Triple Door
For double vanities, hospitality elevations and repeated room programs.
DoorTri-view segmentationPower zoneTop-box undersideMountingWide-span fixing review
Start with Your Target Size
Enter the project dimensions—not assumed standard sizes—and carry them into the inquiry.
Send the overall size or elevation first. Cabinet depth, door split, shelf count, outlet position and rough opening are confirmed on the project drawing.
Project applications
DISCUSS YOUR PROGRAM
Powered Storage for Repeated Bathroom Programs
A consistent room elevation still needs project-specific cabinet, electrical and packing decisions.
Hotels & serviced apartmentsCoordinate room count, typical elevation, cleaning access and replacement planning.
Residential developmentsAlign unit types, wall construction, power routes and installation sequence.
Private-label collectionsReview platform range, labels, manuals, packaging artwork and market versions.
Showroom & retail programsBuild a clear feature ladder from outlet-only to powered lighted cabinets.
Project information
Eight Inputs That Make a Quote Useful
A reference image alone cannot define a powered cabinet. Send the closest available information; missing items can be identified during review.
01Overall sizeWidth, height, depth or project elevation.
02Door layoutSingle, double, triple and preferred handing.
03MountingRecessed, surface or wall-condition review.
04Power moduleOutlet, USB-A, USB-C, count and location.
05Intended devicesCharging equipment and any higher-load use.
06Other functionsLighting, defogger, sensor or magnifier.
07Market & documentsDestination and required compliance scope.
08Quantity & timingEstimated units, sample and delivery target.
From brief to production
A Drawing-Led Development Path
Electrical features are approved with the cabinet construction, not added as an isolated late-stage accessory.
Project Brief
Size, quantity, market, installation and intended devices.
Engineering Review
Cabinet space, outlet module, wiring, controls and service access.
Drawing & Sample
Confirm positions, ratings, labels and user interaction on the selected model.
Approval
Freeze the agreed sample, inspection points and required documents.
Production & Packing
Protect mirror doors, glass shelves, cables and accessories for export delivery.
Pre-production control
Four Checks Before Approval
Acceptance criteria should follow the approved sample, drawing and destination requirements.
Position & Clearance
Outlet, plug and cable remain clear of shelves, hinges and door movement.Electrical Function
Agreed input, output, switching and charging behavior are checked by configuration.Wiring & Service
Cable entry, strain relief, component enclosure and future access follow the drawing.Labels & Packing
Required labels, manuals, accessories and protected export packing are confirmed.
Powered cabinet FAQs
Questions to Resolve Early
Can the outlet be installed inside the medicine cabinet?
Yes, for compatible cabinet constructions. Location, voltage, wiring entry, protection and destination-market requirements must be confirmed before quotation.
Can the cabinet include both an outlet and USB charging?
Outlet-only and outlet-plus-USB directions can be evaluated by model. Port type, output, component space and applicable documentation must be defined for the project.
Can it be recessed or surface mounted?
Both directions may be possible. Wall cavity, cable entry, service access, side finish and mounting details must be coordinated on the approved drawing.
Is the outlet suitable for a hair dryer?
Do not assume suitability from appearance alone. Tell us the intended appliance and load; the responsible electrical professionals must confirm the circuit, protection, component rating and local requirements.
Does an in-cabinet outlet replace the required bathroom wall receptacle?
No such assumption should be made. The cabinet outlet is a product feature; the required bathroom receptacle, circuit, location and protection must be confirmed separately by the responsible local electrical professional.
Can the outlet remain powered when the cabinet door is closed?
Continuous or switched power is a configuration decision. State the intended charging behavior so the control logic, components and project requirements can be reviewed before approval.
Where should the outlet sit inside the cabinet?
The outlet sits on the underside of the upper power box. Its exact left-to-right position follows the approved drawing and must preserve plug projection, cable movement, shelf use, stored-item clearance and service access.
What information is needed for a quotation?
Send cabinet size, door layout, mounting method, outlet and USB requirements, intended appliances, voltage, destination market, quantity and any drawings.
Continue your review
Related Cabinet Decisions
Use these category pages to separate installation, lighting and custom-development questions while keeping the outlet requirement in the same project brief.
Start the technical review
Send Your Powered Cabinet Brief
A size list, reference image and destination market are enough to begin identifying the missing cabinet and electrical decisions.
Availability, performance and documentation are confirmed only for the reviewed specification.
